Falcon / Comet 6cyl to V8 Steering Kit (1963 – All with V8 Spindle) – (1964 up to 6/10/64 with V8 Spindle)

$699.00

SKU: falconv8steeringkitto6-10-64 Categories: , , ,

Description

This is what it takes to swap any 6cyl 60-65 Falcon or Comet with a 1″ sector shaft steering box over to V8 steering when using 1963 to 6/10/1964 Falcon Spindles. Ford changed the spindle outer tie rod hole size in June of ’64. These tie rods are a special order and are more expensive.

If your doing a 6 to 8 swap on any 60-65 Falcon, this will help.

We can match outer tie rod ends to any style of spindle you have.

If you have a 1 1/8″ sector shaft steering box, we can help with that too. Those pitman arms are not reproduced but we have some good used units.

We can modify this kit with a bump steer kit or the quick steer kit for the Mustangs. If you have a special need, send us an email.

This kit comes with a new 65 Falcon center link, new inner tie rod ends, new adjuster sleeves, new outer tie rod ends, a new pitman arm and new roller idler arm with frame bracket.